When something’s messing with your HVAC system, one of the first places to check is your thermostat. Most models have a digital display that will display a specific numerical error code. This error code can be used to help diagnose the problem and streamline the troubleshooting and repair process for HVAC systems like your furnace.
This is even simpler with smart thermostats like the Lennox iComfort model. Let’s review three serious error codes—411, 225 and 31—to find out what the problem is. We’ll also share what steps your technician will take to resolve the problem, and the likely costs to do so.
Solved: iComfort Error Code 411
Error code 411 is an urgent priority to resolve. You’ll see this error code appear when the outdoor unit’s low-pressure switch malfunctions five times or more during one heating or cooling cycle. Since this error code includes the outdoor unit, it might be involved with your air conditioner. Each time the low-pressure switch opens incorrectly, the error count increases. Once it passes five strikes, the thermostat automatically turns down the outdoor unit. This is called a lockout and is a safety feature designed to minimize damage.
Fixing the Problem
A technician will check the system charge using several methods, as the issue could be with the switch’s power connections rather than the low-pressure switch on its own. Once the cause has been determined, technicians will reset the outdoor unit by placing it in test mode or by resetting low-voltage power. Once the issue is repaired, the error code should automatically disappear.
Estimated Repair Cost
Replacing a low-pressure shutoff switch might depend on the specific model of your outdoor unit. You may expect to pay between $200 to more than $600 depending on parts and air conditioning repair costs. The shutoff switch itself costs an average of $30 to $150.
Clearing Error Code 225
Error code 225 is specific to your furnace, particularly the high-pressure switch. This switch is a safety component that releases high pressure inside the furnace, such as when airflow is obstructed. When this error code appears, it means the pressure switch can’t close. Without steady airflow and pressure, the furnace won’t work as efficiently.
Fixing the Problem
The technician will monitor the high-pressure switch to evaluate how it functions. They’ll measure the pressure while it attempts to close during a heating cycle as well as its standard operating pressure. If they notice a problem, an obstruction impacting airflow is the most common culprit. There are a few places to check, such as the vent and combustion air inducer. Technicians will check both these components as well as the condensate drain to find the blockage.
Estimated Repair Cost
Because there are multiple places to check before an obstruction can be found, labor costs should be considered when resolving error code 225. Ultimately, the total cost of this furnace repair will depend on where the problem is located as well as how long it takes the technician to determine the source.
Lennox Thermostat iComfort Error Code 31
Seeing error code 31 on your thermostat means it hasn’t been able to communicate with your furnace for more than three minutes. Multiple components communicate with the thermostat, so you might see this error code when any of them malfunction or fail. Most of the time this can be traced back to an electrical problem, like damaged wiring or a loose connection.
Fixing the Problem
A technician can inspect all the connections and wiring of the communicating components of your furnace. They should test voltages and wiring ohms since particularly high resistance can lead to a disconnection. With a special tool called a multimeter, technicians can find out where the disruption originated from. Sometimes this is the furnace’s float switch, a component that shuts off the furnace when the condensate drain pan is overflowing.
Estimated Repair Cost
With multiple potential causes, it may be difficult to determine the total repair costs of error code 31. Technicians will check the float switch to rule it out before thoroughly reviewing electrical wiring and connections. If the cause is damage or a failed component, replacement part costs should be included. You may expect to spend anywhere from $200 to more than $800 for higher-range models.